Electronic Accessories

Haltech

CHF 76.00

Suits: Elite Pro Plug-in ECU's IC-7 Display Dash Includes: Terminated Harness 1 x AMP 34 Pin 4 Row 4 Keyway 1 x DTM 4 Can Connector 15 x Spare Pins to suit AMP Connector...

Haltech

CHF 107.00

OVERVIEW Platinum PRO Auxiliary I/O Harness Only - 2.5m/8ft

Ecumaster

CHF 289.00

Haldex Drag Racing Controller is an essential device for every competitor using car equipped with a Haldex 4Motion system in drag racing. All the top drivers ( racing audi or VW) of the eastern...

Ecumaster

CHF 68.00

Made of durable and flexible ABS. which is easy to cut to the required shape as your build may not always be the straight OEM binnacle shape. It can also be heated with a...

Ecumaster

CHF 17.00

Now available separately an EGT Sensor Boss with olive and m10x1 thread, these are normally supplied with our EGT Sensor.

Ecumaster

CHF 303.00

Today, motorsport success relies largely on data analysis. Important factors include tyre and brake disc temperatures. We are proud to introduce our new thermal cameras, delivering real-time, precise contactless temperature readings. Measured data is...

Ecumaster

CHF 68.00

Made of durable and flexible ABS. which is easy to cut to the required shape as your build may not always be the straight OEM binnacle shape. It can also be heated with a...

Ecumaster

CHF 142.00

This is our dual vanos module, this little box of tricks allows you to run the BMW dual vanos with your EMU Classic or any other ECU without the option for hi side vanos...

Ecumaster

CHF 351.00

The device contains two independent H-Bridges, with over-current and short circuit protection, capable of 10A continuous current and 30A peak current. H-Bridges can be controlled via device inputs or CAN bus messages. Voltage range:...

Ecumaster

CHF 264.00

Reading and processing wheel speed data is a common porblem in modern racing cars. Most modern ABS systems use active magnetoresistive sensors and any attempts to "tap" into those signals can create errors in...

Ecumaster

CHF 111.00

The CANBUS module is an add on module enabling CAN communication of Ecumaster EMU Classic with external loggers or dashboards. Additional 4 analogue inputs used for switches and additional sensors. Just plug in at...

Ecumaster

CHF 11.00

Connection cable for Ecumaster Data Logger -1 (EDL-1). Length: 1.5m (shielded) Set has EDL-1 plug

Ecumaster

CHF 90.00

The DBW module is required to allow EMU to control the electronic throttle and it is connected to the an AUX or an INJ output. up to 7A H-Bridge output current, only one EMU...

Ecumaster

CHF 0.00

Additional keypad inserts for 4/6/8/12/15 button keypads Ecumaster offer. Please use the link to look at the inserts we offer. Price is per insert, please enter the inserts you require on the delivery notes...

Ecumaster

CHF 62.00

Fully sealed potentiometer for use for example boost or traction control adjuster. Adjustable stops enabling to set any number positions from 2 up to 10 with 36 degrees throw angle. High quality switch and...